Registered Builder 105327 | Fully Insured & Licensed

Building Inspection Services in Subiaco, WA

Syed Ali — building inspector for Subiaco WA heritage and modern homes

Trusted Local Building Inspectors in Subiaco

Subiaco mixes Federation cottages, terrace rows and newer apartments around Rokeby Road and Subiaco Square. As your inspector, I pay close attention to rising damp in older brickwork, parapet and valley flashing on period roofs, and balcony/wet-area waterproofing in newer builds and much more for a complete peace of mind. You’ll get practical advice that helps you decide with confidence.


We provide a wide range of inspection services across Subiaco. Reports are plain English with sharp photos, priorities and repair options you can act on. Expect careful checks of drainage, weep holes, roof plumbing, subfloor ventilation and safety items. All inspections are carried out as per Australian building standards.

Comprehensive Building & Pest Inspection Services

Core Property Inspections

  • Apartment and Strata Inspection – A focused inspection for apartments and strata properties. It checks the internal areas of the unit and visible common property issues to identify defect risks and maintenance concerns before buying or owning.
  • Building and Pest Inspection – A combined inspection that assesses the overall condition of the building and identifies termites, timber pests, and pest-related damage during a single visit. Commonly used for property purchases.
  • Building Structural Inspection – Assesses the main structural elements of a building, including foundations, walls, floors, roof framing, and load-bearing components, to identify movement, cracking or structural weakness.
  • Termite and Pest Inspection – Inspects the property for active termites, past termite damage, and conditions that increase pest risk, using visual checks and industry-approved detection tools.
  • Pre-Purchase Building Inspection – A detailed inspection completed before buying a property to identify defects safety issues and future maintenance costs so buyers can make informed decisions or negotiate confidently.

  • Pre-Sale Building Inspection – An inspection done before listing a property for sale to identify issues early, allowing sellers to fix problems and avoid surprises during buyer inspections.

  • Pre-Settlement Inspection – A final check before settlement to ensure the property condition has not changed since the contract was signed and agreed repairs have been completed.

  • Termite and Pest Inspection – Inspects the property for active termites, past termite damage, and conditions that increase pest risk, using visual checks and industry-approved detection tools.
  • Slab Stage Inspection – Completed before concrete is poured to check site preparation, reinforcement, moisture barriers and compliance with approved plans and Australian Standards.

  • Brickwork Stage Inspection – Checks brick alignment, mortar quality, wall ties, damp proofing and workmanship before the structure is closed in.

  • Roof Frame Stage Inspection – Inspects roof framing, trusses, bracing and tie downs to ensure structural integrity and compliance before roof covering is installed.

  • Lock-Up Stage Inspection – Completed when the building is sealed externally. It checks doors, windows, waterproofing, external finishes and structural elements before internal works continue.

  • Practical Completion Inspection – A detailed final inspection before handover to identify defects, incomplete works and workmanship issues that should be fixed before the owner takes possession.

  • Retaining Wall Inspection – Assesses retaining walls for structural stability, drainage issues, movement cracking and safety concerns, especially important on sloping sites.
  • Building Defect Inspection -Identifies construction defects, workmanship issues and non-compliance in both new and existing buildings, often used for warranty claims or dispute resolution.
  • Dilapidation Inspection – Documents the condition of a property before and after nearby construction work to protect owners, builders and developers from damage disputes.
  • Attic and Crawl Space Inspection– Focuses on roof voids and subfloor areas to identify moisture issues, structural defects, pest activity and insulation problems that are often missed.
  • Exterior Roof Inspection – Inspects roof coverings, flashings, gutters and drainage for damage, leaks, wear and installation issues without accessing internal roof spaces.
  • Waterproofing Inspection – Checks wet areas such as bathrooms, balconies and laundries for correct waterproofing installation to prevent leaks, moisture damage and future failures.
  • Owner Builder Inspection – Designed for owner builders to ensure construction work meets Australian Standards, building codes and acceptable workmanship levels at different stages.
Local Reviews
100 +
Olivia Novak
Syed Ali inspected our Subiaco terrace. He found damp at skirtings and a leaking parapet. The clear report let us negotiate and plan fixes without stress.
Wei Zhang
Descom Consultant checked our new Subiaco apartment at PCI. Balcony falls were wrong and sealant was missing. The builder fixed it before settlement. Huge relief.
Yara Haddad
Pre-sale in Subiaco. Syed Ali flagged blocked subfloor vents and rusted valley gutters. We sorted the issues and listed knowing buyers would have no surprises.

Free Instant Quote

Lead Gen Form
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

3 Easy Steps Process

smiley woman talking phone indoors with a building inspector

Contact Us

Reach out to us via phone, email, or fill out a form online. Let us know the type of inspection you need and guide us on what time suits you the best.

Termite Inspector Doing Termite Inspection at the property in Perth

Inspection Day

Once your booking is confirmed, our inspector will thoroughly examine your property to identify any issues, safety hazards, or non-compliance. A detailed report will be generated based on the findings.

Customer checking the Building Inspection Report Preview on his mobile phone

Same Day Report

You’ll receive a comprehensive, easy-to-understand Building & Pest Inspection Report with all findings and recommendations on the same day of inspection.

Why Choose Us in Subiaco

In Subiaco we often find rising damp in heritage brickwork, rusted valley irons under big trees, parapet flashings that leak into party walls, and balconies that pond water. Add in garden beds covering weep holes and older bathrooms losing waterproofing. We focus on these local trouble spots and set out step-by-step, budget-friendly fixes.

  • Local Expertise – In-depth knowledge of local environment, building styles, and common structural risks.

  • Fully Licensed & Insured – Our inspectors meet all WA building and safety regulations.

  • Fast, Detailed Reports – Receive easy-to-read, photo-documented reports within 24 hours — often in just 4.

  • Advanced Technology – Thermal imaging, moisture meters, and industry-grade inspection tools for unmatched accuracy.

We Also Cover Nearby Suburbs

Case Study of Subiaco

We inspected a 1915 Subiaco terrace in Subiaco. Moisture readings were high along the party wall, and ceiling stains were traced from the parapet. On the roof, we found perished flashings and a rusted valley full of leaf litter.

Our report prioritised re-flashing the parapet, replacing the valley iron, clearing/adding leaf guards, and lowering garden soil to expose weep holes. The buyers negotiated a fair allowance and had roofing works booked before settlement.

Subiaco building inspection: high moisture reading at party wall with meter—likely parapet leak in 1915 terrace.

FAQs

Older bricks and mortar can wick moisture up from the ground, especially where soil or paths sit above the damp-proof course. We check moisture levels, soil heights and weep holes. Your report lists simple fixes that stop the moisture, not just hide it.

Age and debris break down flashings and cappings. Water then tracks into ceilings along the party wall. We inspect flashings, valleys and outlets and explain whether resealing, re-flashing or rebuilding sections is the best long-term fix.

Yes. We often find balcony falls the wrong way, missing sealant, door adjustments and roof outlet issues. A PCI inspection documents defects so the builder rectifies them before you take the keys.

Often it’s low subfloor ventilation or local moisture. We check vents, clearances, leaks and termite-conducive conditions. Improving airflow and fixing moisture sources usually solves it without major disruption.

Keep valleys and gutters clear, especially in autumn. Replace rusted screws and tired flashings early. We’ll show you outlets and overflows to monitor so heavy rain doesn’t back up into ceilings.

They’re active across Perth. Damp subfloors, garden sleepers and stored timber attract them. We look for activity and conditions that invite termites and recommend treatment or monitoring if risk is present.