Registered Builder 105327 | Fully Insured & Licensed
Mount Lawley’s character streets mix Federation homes, Californian bungalows, and newer townhouses off Beaufort Street. As a building inspector, I pay close attention to limestone footings, jarrah subfloors, rusted roof valleys under big trees, and older bathrooms that leak slowly into adjacent rooms. Renovations done over decades can also hide missing flashing or ventilation. With Descom Consultant, you’ll get clear advice before you buy, build, or sell.
Â
We offer a wide range of home inspection services, including pre-purchase, stage and PCI inspections across Mount Lawley and surrounding suburbs. Your report is plain English with photos and priority ratings, so you know what needs action now and what can wait. We check roof plumbing, site drainage, weep holes, balconies, and subfloor moisture and airflow on timber floors. All inspections are carried out as per Australian building standards.
Pre-Purchase Building Inspection – A detailed inspection completed before buying a property to identify defects safety issues and future maintenance costs so buyers can make informed decisions or negotiate confidently.
Pre-Sale Building Inspection – An inspection done before listing a property for sale to identify issues early, allowing sellers to fix problems and avoid surprises during buyer inspections.
Pre-Settlement Inspection – A final check before settlement to ensure the property condition has not changed since the contract was signed and agreed repairs have been completed.
Slab Stage Inspection – Completed before concrete is poured to check site preparation, reinforcement, moisture barriers and compliance with approved plans and Australian Standards.
Brickwork Stage Inspection – Checks brick alignment, mortar quality, wall ties, damp proofing and workmanship before the structure is closed in.
Roof Frame Stage Inspection – Inspects roof framing, trusses, bracing and tie downs to ensure structural integrity and compliance before roof covering is installed.
Lock-Up Stage Inspection – Completed when the building is sealed externally. It checks doors, windows, waterproofing, external finishes and structural elements before internal works continue.
Practical Completion Inspection – A detailed final inspection before handover to identify defects, incomplete works and workmanship issues that should be fixed before the owner takes possession.
Free Instant Quote
Reach out to us via phone, email, or fill out a form online. Let us know the type of inspection you need and guide us on what time suits you the best.
Once your booking is confirmed, our inspector will thoroughly examine your property to identify any issues, safety hazards, or non-compliance. A detailed report will be generated based on the findings.
You’ll receive a comprehensive, easy-to-understand Building & Pest Inspection Report with all findings and recommendations on the same day of inspection.
Common findings here include rising damp in older brickwork, bouncy jarrah floors from weak subfloor ventilation, rusted valleys and gutters, and movement cracks around fireplaces. Townhouses can show balcony waterproofing issues and tight fire doors. We focus on these Mount Lawley trouble spots and map out staged, budget-friendly repairs that actually solve the cause.
Local Expertise – In-depth knowledge of local environment, building styles, and common structural risks.
Fully Licensed & Insured – Our inspectors meet all WA building and safety regulations.
Fast, Detailed Reports – Receive easy-to-read, photo-documented reports within 24 hours — often in just 4.
Advanced Technology – Thermal imaging, moisture meters, and industry-grade inspection tools for unmatched accuracy.
During a pre-purchase building & pest inspection in Mount Lawley, we checked a 1920s weatherboard cottage and found advanced rot to the lower boards and the corner post (as in the photo). The timber was soft to probe, paint was peeling, and a blocked subfloor vent plus garden beds hard against the wall kept the area wet—conducive to termites, although no live activity was sighted at the time.Â
Â
We classified it as a major timber defect and recommended: restore 150 mm clearance to ground, clear the vent for airflow, replace the decayed post and boards, add proper flashing/drip edge, and have a licensed pest tech complete an invasive check and treatment/monitoring plan. Our report (to Australian Standards) gave the buyer solid leverage; the seller agreed to fund timber replacement and pest treatment before settlement, so the new owners moved in with confidence.
Older bricks and limestone footings can wick ground moisture, especially where soil or garden beds cover the damp-proof course. We check weep holes, soil heights and moisture levels. Your report lists simple fixes: lower soils, improve falls, treat affected walls, and manage ventilation.
Often low subfloor airflow or local moisture. Blocked vents, damp soil or leaking pipes can soften timber. We assess ventilation and moisture, then suggest practical steps like clearing vents, adding grilles, fixing leaks and improving drainage.
Rusty valleys, brittle tiles and tired flashing are common, plus leaf-choked gutters. We inspect fixings and outlets and show you what to repair now versus monitor. Early roof work costs less than fixing damaged ceilings later.
Yes. We often find balcony falls the wrong way, weak waterproofing and missing sealant, plus door and window adjustments. A PCI inspection documents defects so the builder fixes them before settlement.
Keep soil and mulch below damp-proof courses, ensure paths fall away from the house, keep weep holes clear, and ventilate rooms well. We’ll point out exact locations and give step-by-step maintenance you can action quickly.
They’re active across Perth. Damp subfloors, old sleepers and stored timber attract them. We check for activity and conducive conditions, then recommend treatment or monitoring. Good ventilation and dry timbers help reduce risk.