Registered Builder 105327 | Fully Insured & Licensed

Building Inspection Services in Cottesloe, WA

Syed Ali — coastal suburb building inspector for Cottesloe WA (professional profile headshot)

Trusted Building & Pest Inspections in Cottesloe

Cottesloe homes sit close to the coast, so salt, wind and sun work a bit harder on roofs, balconies and timber. In older brick‑and‑tile places we often see cracked ridge capping and worn valleys. In newer units, balconies can hold water if the fall is off. Timber decks and window hardware can corrode or swell faster near the sea. Our job is to spot these early and explain them in plain English.

 

At Descom Consultant, we know Cottesloe estates, soils and exposure, so a building inspection here focuses on roof plumbing and tie-downs. Most owners won’t spot failed shower membranes behind tiles, or corrosion hiding on roof fasteners. I prove concerns with a moisture meter, thermal camera, borescope, and simple level or gradient checks. We offer all types of building inspections for any property—new or established—across all estates, for peace of mind. All inspections are carried out in accordance with Australian Standards.

Comprehensive Building & Pest Inspection Services

Core Property Inspections

  • Apartment and Strata Inspection – A focused inspection for apartments and strata properties. It checks the internal areas of the unit and visible common property issues to identify defect risks and maintenance concerns before buying or owning.
  • Building and Pest Inspection – A combined inspection that assesses the overall condition of the building and identifies termites, timber pests, and pest-related damage during a single visit. Commonly used for property purchases.
  • Building Structural Inspection – Assesses the main structural elements of a building, including foundations, walls, floors, roof framing, and load-bearing components, to identify movement, cracking or structural weakness.
  • Termite and Pest Inspection – Inspects the property for active termites, past termite damage, and conditions that increase pest risk, using visual checks and industry-approved detection tools.
  • Pre-Purchase Building Inspection – A detailed inspection completed before buying a property to identify defects safety issues and future maintenance costs so buyers can make informed decisions or negotiate confidently.

  • Pre-Sale Building Inspection – An inspection done before listing a property for sale to identify issues early, allowing sellers to fix problems and avoid surprises during buyer inspections.

  • Pre-Settlement Inspection – A final check before settlement to ensure the property condition has not changed since the contract was signed and agreed repairs have been completed.

  • Termite and Pest Inspection – Inspects the property for active termites, past termite damage, and conditions that increase pest risk, using visual checks and industry-approved detection tools.
  • Slab Stage Inspection – Completed before concrete is poured to check site preparation, reinforcement, moisture barriers and compliance with approved plans and Australian Standards.

  • Brickwork Stage Inspection – Checks brick alignment, mortar quality, wall ties, damp proofing and workmanship before the structure is closed in.

  • Roof Frame Stage Inspection – Inspects roof framing, trusses, bracing and tie downs to ensure structural integrity and compliance before roof covering is installed.

  • Lock-Up Stage Inspection – Completed when the building is sealed externally. It checks doors, windows, waterproofing, external finishes and structural elements before internal works continue.

  • Practical Completion Inspection – A detailed final inspection before handover to identify defects, incomplete works and workmanship issues that should be fixed before the owner takes possession.

  • Retaining Wall Inspection – Assesses retaining walls for structural stability, drainage issues, movement cracking and safety concerns, especially important on sloping sites.
  • Building Defect Inspection -Identifies construction defects, workmanship issues and non-compliance in both new and existing buildings, often used for warranty claims or dispute resolution.
  • Dilapidation Inspection – Documents the condition of a property before and after nearby construction work to protect owners, builders and developers from damage disputes.
  • Attic and Crawl Space Inspection– Focuses on roof voids and subfloor areas to identify moisture issues, structural defects, pest activity and insulation problems that are often missed.
  • Exterior Roof Inspection – Inspects roof coverings, flashings, gutters and drainage for damage, leaks, wear and installation issues without accessing internal roof spaces.
  • Waterproofing Inspection – Checks wet areas such as bathrooms, balconies and laundries for correct waterproofing installation to prevent leaks, moisture damage and future failures.
  • Owner Builder Inspection – Designed for owner builders to ensure construction work meets Australian Standards, building codes and acceptable workmanship levels at different stages.
Local Reviews
100 +
Miriam O’Leary
After weeks of damp smells in our Cottesloe unit, Syed Ali traced it to a tiny balcony fall and blocked outlet. Clear photos, simple steps, and the fix cost a few hundred—not thousands. Finally sleeping easy.
Diego Martínez
Descom Consultant did a pre‑purchase in Cottesloe. They spotted salt‑rusted roof screws and cracked ridge pointing the agent missed. We used the report to shave $4k off and schedule repairs. Straightforward and fair.
Yasmin Al‑Hassan
Syed Ali flagged mis‑sealed shower and loose window flashing; builder fixed before keys. No drama, no surprises, just a clean handover inspection service in Cottesloe.

Free Instant Quote

Lead Gen Form
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

3 Easy Steps Process

smiley woman talking phone indoors with a building inspector

Contact Us

Reach out to us via phone, email, or fill out a form online. Let us know the type of inspection you need and guide us on what time suits you the best.

Termite Inspector Doing Termite Inspection at the property in Perth

Inspection Day

Once your booking is confirmed, our inspector will thoroughly examine your property to identify any issues, safety hazards, or non-compliance. A detailed report will be generated based on the findings.

Customer checking the Building Inspection Report Preview on his mobile phone

Same Day Report

You’ll receive a comprehensive, easy-to-understand Building & Pest Inspection Report with all findings and recommendations on the same day of inspection.

Why Choose Us in Cottesloe

From an inspector’s eye, coastal air speeds up corrosion of roof screws and gutters, balcony membranes can fail, and garden beds can bury weep‑holes. Older tiled roofs near the sea often need re‑bedding and pointing sooner. Timber decks and pergolas also cop the weather. We check these hotspots first and tell you what to fix now, what to budget for and what to monitor.

  • Local Expertise – In-depth knowledge of local environment, building styles, and common structural risks.

  • Fully Licensed & Insured – Our inspectors meet all WA building and safety regulations.

  • Fast, Detailed Reports – Receive easy-to-read, photo-documented reports within 24 hours — often in just 4.

  • Advanced Technology – Thermal imaging, moisture meters, and industry-grade inspection tools for unmatched accuracy.

We Also Cover Nearby Suburbs

Recent Finding in Cottesloe

During a pre‑purchase building and timber pest inspection of a 1950s cottage near Eric Street, we uncovered significant wood rot to the bathroom window frame and rear deck joists. Moisture tracking showed water entering from a blocked balcony outlet and failed flashing, with coastal exposure speeding decay. We mapped the affected timbers and recommended replacing rotten sections, treating adjacent members, and fixing drainage and flashing as priorities. 

 

With our photos and clear action list, the buyer negotiated a repair allowance and lined up a licensed carpenter and pest manager before the settlement of this property in Cottesloe.

Cottesloe building and pest inspection- severe wood rot in deck:window timber around metal strap from moisture ingress.

FAQs

Salt speeds up corrosion on screws, gutters and flashings. Tiles and ridge capping also age faster in the wind. We recommend yearly roof checks and extra care after winter storms to catch small leaks early.

Often the fall is too flat or outlets block with sand and debris. Water then sits at door tracks and seeps inside. We test falls, check membranes and suggest fixes like re‑screeding or adding outlets.

Older double‑brick walls with high garden beds can wick moisture. We measure levels, look for salts and recommend lowering soil, improving drainage and, if needed, specialist damp treatment.

Rinse salt regularly, keep sand and mulch off posts, and re‑coat timbers as scheduled. We check for early rot at fixings and advise simple repairs before bigger work is needed.

Clear gutters and balcony outlets, trim back vegetation, and secure loose roof capping or flashings. Keep weep‑holes clear of sand. After big winds, a quick roof and balcony check is wise.

DIY checks are great for cleaning and looking for stains or rust. Call us if you see water marks, swelling skirting, balcony ponding or loose tiles. A professional report gives photos, priorities and clear next steps.