Registered Builder 105327 | Fully Insured & Licensed

Who is Responsible for Fixing Issues Found in a Building Inspection Report

Close-up photo of a cracked concrete floor near a wall with a yellow measuring tape showing the width of the crack — building inspection defect example in Perth home.

Overview

Buying, building, or renting a home in Perth can be exciting, until your building inspection report arrives showing cracks in the slab, roof leaks, moisture issues, or faulty smoke alarms. That is when most people start asking, who is actually responsible for fixing these problems?

As a local building inspector who has inspected hundreds of homes across Perth, I can confirm that confusion often begins after the report is delivered. The positive side is that Western Australia’s property laws make it clear who must take action, whether it is the seller before settlement, the buyer after handover, or the builder under warranty. This guide explains everything in straightforward language, helping you understand exactly what to do next when your inspection report lists issues.

Buyer Responsibilities

If you’re the buyer, you usually organise and pay for the building inspection before settlement. Your inspector’s job is to identify structural defects, safety concerns, and maintenance issues so you can make an informed choice. The report itself does not require the seller to fix anything unless your Offer and Acceptance contract includes a building inspection condition.

That condition can specify:

  • Who pays for repairs

  • What qualifies as a structural defect

  • How long the seller has to fix problems

  • Your right to withdraw if serious faults are found

If no clause exists, you typically buy the property as is. In that case, you take responsibility for any repairs once the settlement is complete.

Common Perth examples: foundation cracks from reactive clay soils, moisture readings in bathrooms, or early termite activity in garden beds. If you want these addressed before settlement, they must be negotiated and written into the contract.

Seller Responsibilities

A seller’s duty mainly covers disclosure and safety compliance. You must ensure the home has:

  • Working hard-wired smoke alarms less than ten years old

  • At least two RCD safety switches fitted by a licensed electrician

These are legal requirements under WA law. If your contract includes an inspection clause, you are responsible for completing any agreed repairs before settlement or adjusting the price accordingly.

If you sell without an inspection condition, you generally have no obligation to fix cosmetic or minor issues. However, concealing serious structural or safety defects can breach consumer law.

Owner-Occupier Responsibilities

Once you take ownership, you are responsible for maintaining the home. If council inspectors find unsafe or unapproved work — such as a patio or extension built without a permit — they can issue a building order requiring you to fix it. Ignoring an order allows the council to carry out the work and recover the cost.

Maintaining good records of approvals and compliance certificates helps avoid these problems when you later sell or refinance.

Landlord and Tenant Responsibilities

Landlords must keep rental properties in a reasonable state of repair under the Residential Tenancies Act 1987 (WA). This includes maintaining the structure, plumbing, wiring, and all safety features.

  • Urgent repairs (such as loss of power, burst pipes, or gas leaks) must be arranged within 24 hours.

  • Other urgent repairs should be completed within 48 hours.

Tenants must keep the property clean, report faults quickly, and avoid causing damage. If a tenant causes damage — for example, by breaking a window — they must pay for repairs. Tenants can request emergency repairs if the landlord is unresponsive, but they must provide receipts for reimbursement.

Private vs Council Inspectors

Private inspectors, like the one you hire before buying, provide professional reports but cannot enforce repairs. Their findings guide your negotiation. Council inspectors, however, have legal authority under the Building Act 2011 to issue building orders, stop unsafe work, and enforce compliance. In simple terms:

  • Private inspectors advise.

  • Council inspectors enforce.

Practical Steps After Receiving Your Report

  1. Review your contract conditions carefully.

  2. Prioritise major safety and structural issues first.

  3. Discuss the report with your agent or conveyancer before making demands or withdrawing.

  4. Negotiate repairs or price adjustments in writing.

  5. Ensure all mandatory safety items (RCDs, smoke alarms) are compliant before settlement.

  6. Keep a record of any agreements, invoices, or compliance certificates.

Key Takeaways

  • The buyer arranges and pays for the inspection.
  • The seller is only obligated to fix defects if the contract requires it.
  • Safety devices (RCDs and smoke alarms) must always meet WA standards before settlement.
  • Builders must fix defects under statutory warranty and code compliance rules.
  • Landlords must maintain rentals; tenants must report and not cause damage.
  • Councils can issue binding orders for unsafe or illegal work.

Conclusion

Owning or buying property in Perth means understanding your responsibilities once an inspection report reveals defects. A report does not automatically make anyone fix the problems; it is a tool that helps guide decisions and negotiations. The key is to know your position and act within the rules.

If you are the buyer, protect yourself by adding clear inspection conditions in the contract before signing. If you are the seller, meet all safety requirements and be honest about known issues. Builders must meet code standards and correct any defects during the warranty period, while landlords must maintain safe, livable homes for tenants.

Always keep communication and agreements in writing, and use qualified trades for repairs. When in doubt, refer to WA’s Building Act and Consumer Protection guidelines or speak with a licensed inspector. Taking action early and within the law ensures your home stays safe, compliant, and valuable for years to come.

FAQs

Not automatically. The seller is only required to repair issues if your Offer and Acceptance contract includes a written building inspection condition that specifies this. Without that clause, you buy the property in its current condition and take responsibility for future repairs after settlement.

If your contract includes a satisfactory inspection condition, you can request the seller to repair the issue, adjust the price, or withdraw from the sale if the defects are major. Examples include foundation movement, roof frame damage, or severe water ingress.

The seller must ensure hardwired smoke alarms less than ten years old and at least two RCD safety switches are fitted by licensed electricians before the sale is completed. These safety items are mandatory under Western Australian law.

Under WA law, builders must fix any defects reported within four months of practical completion at no cost to the owner. For unresolved issues or structural defects, you can lodge a complaint with Building and Energy WA or claim under Home Indemnity Insurance if eligible.

The Residential Tenancies Act requires landlords to arrange essential repairs such as power, water, or gas within twenty four hours and other urgent issues within forty eight hours. Failing to act can result in tenant compensation claims or legal orders through the State Administrative Tribunal.

```

Contents

Have a Question?

Need a Pre-Purchase Inspection Report?

Secure peace of mind with a trusted inspector. Choose your preferred day and time and receive your detailed report with photos on the same day

Syed Ali Building Inspector Profile